NONE
ROHM Semiconductor Diode Zener Single 3% 500mW 2-Pin MSD Ammo
Package Type: 1206
CAD Models: Footprint
What is SnapEDA?
SnapEDA is a free library of symbols & footprints for the NONE by EMI and for millions of electronic components.
Compatible with Eagle, Altium, Cadence OrCad & Allegro, KiCad, & more.
Discover parts from Texas Instruments, Microchip, TE Connectivity, Vishay & more.
- 2D Model
- 3D Model
Symbol
The 2D model for this
part is not available.
The Exact Symbol for this part is not available.
BuildFootprint
No web preview
This Footprint is Available for
Download Footprint
3D Model
Preview not available
Note: If you're using IE or Edge, right-click and choose "Save as" to download.
Get this 3D Model in 24 hours!
More Resources
| Verification | Issues | Specs | Pricing |
Specifications for the NONE
| Part Name | NONE |
| Manufacturer | ROHM Semiconductor |
| Formats Available for Symbols and Footprints |
Altium, Eagle, KiCAD, Cadence OrCad/Allegro, PADS, DxDesigner, PCB123, Pulsonix, Proteus |
We could not find inventory or pricing across major distributors for the NONE by EMI.
Related Questions
Can you provide a KiCad footprint for this component?
Looking for a KiCad footprint for this part. Thanks
Added 2 months, 1 week ago.
Why aren't you using the component datasheet recommended footprint?
I understand that components can report that their package is the same as some standard, but that... (more)
Added 1 year, 10 months ago.
Symbol for USB C recepticle
Hi I downloaded the models for PN 1054500101. The symbol shows the shields to be overlapping with... (more)
Added 1 year, 10 months ago.
Documenting Slotted holes for PCB house on USB3160-30-0170-0-C package
A popup box says to follow instructions in the first link below and run (in OrCAD v17.2+) the NC ... (more)
Added 1 year, 2 months ago.
About 7461098 footprint TH size
I was using 7461098 footprint download from snapEDA, pin hole is 1.47mm smaller than recommended ... (more)
Added 1 month, 3 weeks ago.
5988510207F Footprint for Allegro
Hi, The associated footprint has pads but no dra or psm file. Regards, Michael
Added 1 month, 3 weeks ago.
Downloading CSD97394Q4M footprint for KiCad
Dear Sir/Madam, I am unable to download Kicad footprint of CSD97394Q4M gate driver. It is TI p... (more)
Added 1 month, 3 weeks ago.
Footprint needs updating
MR25H40MDF The footprint that you have for this part is wrong, it needs to be a small flag not... (more)
Added 1 month, 3 weeks ago.
SI5391A-A-GM Part height
When I downloaded this part, I found that the height of the part is very different from the datas... (more)
Added 2 months, 4 weeks ago.
Why GND pins are shown on a single pin in KiCAD imported part symbol ?
Part: Nucleo-F429ZI Unit E of this part in symbol editor is showing all GND on CN11, pin19 only.... (more)
Added 2 months, 2 weeks ago.
Issue about this part "Recom R1SE"
Hello, The Recom R1SE 3D is wrong. There aren't 8 pins, only 5. Best regards, Jeno
Added 1 month ago.
On bundled 2D-3D model downloads for Altium
When download LM1117S-ADJ/NOPB, 3D model is not downloaded together, but 3D model must be downl... (more)
Added 3 weeks, 1 day ago.
Looking for a symbol for this part: XCZU4EG-1FBVB900E
Please help me find the symbol of XCZU4EG-1FBVB900E
Added 1 month, 1 week ago.
Is the footprint looking down on the module or looking at the belly of the chip?
I can't tell which is pin 1 depending on if looking from the bottom of the chip or looking down f... (more)
Added 3 months, 4 weeks ago.
ECS-271.2-10-47Q-ES-TR
The symbol incorrectly lists two pads as ground (GND), when one should not be connected (NC). ... (more)
Added 2 months, 4 weeks ago.
Is this the 3D model for SM04B-SRSS-TB(LF)(SN)?
Please fix the 3D model of a JST header, part number SM04B-SRSS-TB(LF)(SN) . https://www.snaped... (more)
Added 4 months, 2 weeks ago.
Is the footprint looking down on the module or looking at the belly of the chip?
I can't tell which is pin 1 depending on if looking from the bottom of the chip or looking down f... (more)
Added 3 months, 4 weeks ago.
About the end user experience of the Feasycom HC05 Module
Due to the serious shortage of HC05 modules, we need to replace the modules urgently.I bought one... (more)
Added 3 months, 4 weeks ago.
Feedback on Op-Amp Schematic Display
never like the box shape for op amps. how can get internal functionality version?
Added 3 months, 3 weeks ago.
Additional pads in the TLH-020-0.50-G-D EDA footprint
Based on the ECN-273259 drawing for the TLH-020-0.50-G-D part, there should only be one two rows ... (more)
Added 5 months, 1 week ago.
Attaching the footprint to Orcad Schematic for generating netlist
Dear Team, I downloaded the footprint OPA462IDDA from Snapeda.It's symbol is not available. ... (more)
Added 6 months ago.
About the KiCAD ESP32-S2-WROVER Symbol
The ESP32-S2-WROVER symbol has too many pins for EXP. Your symbol has 21 (43_1 to 43_21) pins ... (more)
Added 3 months, 1 week ago.
AT32UC3L064 Proteus
HI there i have imported the AT32UC3L0 Microcontroller on to proteus, however after I have import... (more)
Added 4 months, 4 weeks ago.
Wrong Footprint associated with Part
Hi, Your search page says you have the datasheet and footprint for a resistor network (MFG P/N... (more)
Added 1 year, 3 months ago.
The footprint is missing for the part NFM15PC474R0J3D
Part number NFM15PC474R0J3D is missing its footprint and associated files. I tried running the ba... (more)
Added 6 months, 2 weeks ago.
Is it possible to get the spicemodel of LV-25P?
Is it possible to get the spicemodel of LV-25P
Added 1 year, 4 months ago.
Missing padstack
Downloaded footprint for SAMTEC-HTSW-107-07-X-D for Orcad Pcb, but keep geetting
Added 1 year, 3 months ago.
I get an error saying "Unexpected line 180 column 52"
hello when i download the footprint and symbol for part#MSS6132-153MLC for use in eagle.I get a e... (more)
Added 1 year, 11 months ago.
Added 1 year, 10 months ago.
Reporting a footprint issue
This footprint is completely incorrect for this device. Firstly, it does not have the thermal pad... (more)
Added 1 year, 11 months ago.
When download schematic and footprint for Altium 10 no files show up. Why?
I followed the steps to import the files and when i open the import wizard in Altium nothing appe... (more)
Added 2 years, 3 months ago.
Orgin of the footprint
Hi, I have downloaded a sim card footprint for allegro 16.6 ( molex-78646-3001). All pads co-ord... (more)
Added 1 year, 6 months ago.
Need to design nfc antenna
Hi, I am using nfc clrc663 NFC reader ic and now i want to design 2 turn nfc antenna for that. c... (more)
Added 1 year, 6 months ago.
How to design NBIoT board?
I want to design NB-IoT board using Quectel or Telit or ublox module. The board will collect data... (more)
Added 1 year, 6 months ago.
Unable to create symbol
MT40A4G8KVA-083H:G- This DDR4 memory IC has no details for create a symbol.
Added 1 year, 4 months ago.
3d image import help!!??
I have seem to hit a dead end when trying to upload the 3d image I downloaded for a component of ... (more)
Added 1 year, 1 month ago.
Wrong pin out for HC-05 bluetooth module?
What is this part? This isnt the pin out for the HC-05 Bluetooth module
Added 2 years ago.
How to mount Arduino Pro Mini and USB mini host shield together?
I want to make a wifi keylogger and in this project, I'm facing some issues like mounting a Pro M... (more)
Added 1 year, 2 months ago.
footprint for ICM20948 9DoF Motion Sensor Breakout
I need a foot print for the component ICM20948 9DoF Motion Sensor Breakout for the latest eagle... (more)
Added 1 year, 3 months ago.
Added 1 year, 9 months ago.
Can't open LM78L05ACZ/NOPB Voltage regulator
Cannot open the "LM78L05ACZ/NOPB" Voltage regulator in orcad. Is there any other device I can cho... (more)
Added 2 years, 3 months ago.
I cannot download footprint. An error pops-up
HI I can not download footprint of parts. i receive this message : we have snapped our fingers... (more)
Added 7 months, 2 weeks ago.
The footprint is showing error type 45 in SS-10-15SP-LE
The footprint is showing error:error type 45 -footprint has no in SS-10-15SP-LE. what should i do?
Added 1 year, 5 months ago.
VSMY2940G and TEMT6200FX01 footprints on Kicad 5.0.2
When importing netlist for Vishay gull-wing LEDs : Error: Component “D2” pad “1” not found in ... (more)
Added 3 weeks, 4 days ago.
How to import into CircuitStudio 1.4?
Hello, I'm a new user to both Circuit Studio (1.4) and SnapEDA. I've signed up to SnapEDA and the... (more)
Added 2 years ago.
Added 1 year, 7 months ago.
Import .lia file in PCAD-2002
i have downloaded symbol and footprint for ATMEGA328P for PCAD-2002 in .lia format but i am unabl... (more)
Added 3 months, 1 week ago.
Wrong footrpint for 1825255-1
I was looking for a footprint for this part and found that snapEDA had it, however, it's the wron... (more)
Added 4 months, 3 weeks ago.
About Simulations models
Hi, im pretty new in this site. I wonder how can i use Simulation Models? Which program should i ... (more)
Added 5 months, 1 week ago.
Footprint violates DRC rule
The pads are less than 10mil apart which causes an error with the DRC
Added 8 months, 3 weeks ago.
Where can I find a right footprint for USB C Molex 105450-0101 ?
The footprint you provide for connector USB C Molex 105450-010 is wrong and not usable in PROTEUS... (more)
Added 1 year ago.
Do any one have eagle library of this TE part CAT-SCH691-T1
Do any one have eagle library of this TE part CAT-SCH691-T1 ?
Added 1 year, 12 months ago.
Orcad/Allegro symbol for ISO5852S
For Orcad / Allegro I only get the symbol not pcb footprint.
Added 1 month ago.
Import footprint
Hi every body I draged lia file into Altium but it is only atext file and i can not to use footp... (more)
Added 1 year, 4 months ago.
What is the filling done in the antenna area?
Hi, In bgm13s footprint what is that filling done in the antenna area. Is that a ground clearanc... (more)
Added 2 years ago.
No issues have been reported for the NONE
If you experienced any issues with the symbol or footprint, please report it.