FPC pattern document

Hi Simay

Thanks for reaching out.

The FH12-30S-0.5SH is a board-mount receptacle and mates with an FFC/FPC cable (not another connector).

You’ll need a 30-pin, 0.5 mm pitch, 0.3 mm-thick FFC/FPC. Because FFC/FPC cables aren’t directly PCB-mount components, there isn’t a PCB footprint/pattern for the cable itself.

For reference, please refer:

Recommended mating FFC/FPC info on page 3:
https://www.hirose.com/en/product/document?clcode=CL0586-0525-1-55&productname=FH12-30S-0.5SH(55)&series=FH12&documenttype=2DDrawing&lang=en&documentid=0000987484

Recommended FFC/FPC dimensions on page 10:
https://www.hirose.com/en/product/document?clcode=CL0586-0525-1-55&productname=FH12-30S-0.5SH(55)&series=FH12&documenttype=Catalog&lang=en&documentid=D31648_en

Please don’t hesitate to reach out if you have any further questions.

Best Regards
Amina

Hello again!

I hope you are well. Just a quick follow-up here.

Please check our previous message and let us know if it was helpful or if you have any other inquiries. We’d be more than happy to help!

Thanks!

Hello again

Please contact us if you have more information on this or any other inquiries. We'd be glad to help!

For now, we're going to close this conversation.

Best Regards
Amina