High density Connector

Hello Afshin,

Thanks for reaching us and asking this question. We are going to investigate it, and we will get back to you as soon as we have an update.
Have a nice day!

Hello Afshin,

Thank you for waiting while we checked your question.

Upon review, the high-density connectors on the ABX00042 [https://www.snapeda.com/parts/ABX00042/Arduino/view-part/ ] are Hirose connectors with part number DF40C-80DS-0.4V(51) [https://www.hirose.com/en/product/document?clcode=CL0684-4002-0-51&productname=DF40C-80DS-0.4V(51)&series=DF40&documenttype=2DDrawing&lang=en&documentid=0001001229 ], which are the receptacle versions.

Please note that the connector used on the ABX00042 device itself is the male Hirose connector with part number DF40C-80DP-0.4V(51).

If you intended to use a different mating part number with the -HC suffix as mentioned, please let us know. We would be happy to assist with modifying the footprint based on your required part number.

For anything else, please let us know, and we will be glad to assist.

All the best,
Dizar

Hi Dizar,
Thanks for your response and clearification of the module symbol build!
I understand that 3D step file But how could a ABX00042 symbol and footprint be of interest in a design?
If you want to use the actual ABX00042 (Arduino Portenta H7) in a host board then you need to have a symbol and footprint that could mate with correct connector at host board, i.e. DF40HC(3.5)-80DS-0.4V(51).
In additon should be possible to generate that there are 2 x Hirose High density connector DF40HC(3.5)-80DS-0.4V(51) in the BOM for this module which I can't get if I use your symbol if I modified manually ;).
So, answe to your question! Yes, it would be great if you could create a symbol for a ABX00042 host board that mates with ABX00042.

Bet Regards.
Afshin

Hello Afshin,

Thank you for replying and for clarifying that you would like to use the Hirose -HC version for mating.

Since the recommended layout for this connector is slightly different, our engineers will work on creating a suitable version for you.

Could you please confirm which ECAD tool you will be using, so we can deliver the model in the correct format?

Best regards,
Dizar

Hi,
I replied your question via email but it didn't show up here so I write it again.
It sounds great if you could create a new symbol and footprint for a hostboard.
I'm using AutoDesk Fusion 360.
Thanks.

Best Regards
Afshin

Hello Afshin

I am Amina, stepping in for Dizar.

Thank you for confirming the part number DF40HC(3.5) 80DS 0.4V(51). We will create the model and upload it to the part page here:
https://www.snapeda.com/parts/DF40HC%283.5%29-80DS-0.4V%2851%29/Hirose/view-part

We will let you know as soon as it is ready.

Best Regards
Amina

Hello Afshin

The 2D model for DF40HC(3.5)-80DS-0.4V(51) has been created and uploaded to the site. Please feel free to download it from the Part Page and use it in your design.
https://www.snapeda.com/parts/DF40HC%283.5%29-80DS-0.4V%2851%29/Hirose/view-part/

Happy designing!

Best Regards
Amina