Hi,
The 10151114-001TLF connector can be used for two different standards: MXM3 and SMARC standards.
Since the usage is very different for each standard, the schematics symbol will also be different. The Smarc standard uses 314 pins, while in MXM3 standard it seems like many pins are grouped together, so that the symbol only has 281 pins.
The symbol available on SnapMagic seems to be only the 281-pin symbol, supporting the MXM3 standard.
Would it be possible to create a symbol for 10151114-001TLF, which is compatible with the Smarc standard?
This would be a schematics symbol following the Smarc standard with pin numbers P1..156 and S1..158 (ref Smarc v2.2 standard).
Best Regards,
Knut Gabrielsen
Added 3 days, 20 hours ago.
Hi Knut,
Thank you for your patience while we looked into your inquiry.
As you mentioned, 10151114-001TLF has two different mounting footprints depending on the standard. The footprint currently shown on our site is for the MXM version, since Amphenol explicitly references this part number for the MXM standard in their datasheet (page 2):
https://cdn.amphenol-cs.com/media/wysiwyg/files/documentation/datasheet/ssio/ssio_mxm.pdf
At the moment, we do not have a 2D model available for the SMARC mounting type. If you need the SMARC version urgently, you can click the Request Now button on the part page to use our Instapart service for a small fee, and we will create the model within 24 hours, guaranteed:
https://www.snapeda.com/parts/10151114-001TLF%20(SMARC)/Amphenol/view-part/
In the meantime, we have reached out to Amphenol support to confirm whether there is an orderable part number available for the SMARC mounting version. We will update the part page with the correct part number as soon as we hear back from Amphenol.
Please let us know how you would like to proceed.
All the best,
Dizar
Answered 3 days, 13 hours ago.
Hi Dizar,
Thank you for the response! If Amphenol comes back and confirms that the there is an orderable part number available for the SMARC mounting version, I will consider asking for the Instapart service.
Again, thank you very much,
Best Regards,
Knut
Answered 3 days, 2 hours ago.
Hi Knut,
Thank you for your reply.
That sounds good. As soon as we receive confirmation from Amphenol regarding an orderable part number for the SMARC mounting version, we’ll follow up with you right away.
In the meantime, if your timeline changes or you decide to proceed with the InstaPart service, just let us know and we’ll be happy to assist.
Thanks again for your patience, and we’ll be in touch as soon as we have an update.
Best regards,
Dizar
Answered 3 days, 1 hour ago.