The pads are according to the datasheet a little bit to short. 1.7mm to 1.8mm

Hello!

Thanks for reporting this issue and for being part of SnapEDA! We are looking into it right now and we will keep you posted.

Elizabeth

Hi,

Thanks for waiting for us. We have double-checked this package. We created the SOIC package following IPC-7351B, and it seems that you are comparing it against the recommended footprint layout. The recommended layout shows 1.8mm and our footprint is 1.97mm.

Did you check the verification tab below the footprint? Please check the section in the verification checker where it shows the standard used. Let me know if you don't see it and I can help you!

Thanks again,
Elizabeth

Hi Elizabeth,
I saw the standard and 1.97mm is probably better indeed!. But if I download the package, and manually measure I come with 1.7mm? https://ibb.co/Tq30fzv Am I doing something wrong then?

This also probably holds for AMC1311DWVR

Hello!

Thanks for letting me know, it looks like a problem with a cached footprint, however, we have updated the footprint. You can download it now: https://www.snapeda.com/parts/AMC1311DWVR/Texas%20Instruments/view-part/

We also updated the footprint for the AMC1311DWVR part.

Please let me know if you have any more feedback or questions,
Elizabeth

Thank you! Btw, pads are now 1.8mm according to the datasheet. (fine for me, but as long as that is intended, due to the reason you mentioned 1.97mm)

Yes! That's correct, we updated the footprint. Happy that you like our footprint now. :)