Does SHT41-AD1B-R2 have a filter membrane?
This part number (SHT41-AD1B-R2) should be without the filtermembrane per the datasheet. Can you please look into and verify?
The part description and the 3D model will need to be changed, if true*. (*Please look at other's in the SHT4x series in your library to verify, as well).
In the meantime, I downloaded the 3D model from part number SHT401-AD1B-R2 in your library, which gives the correct look (lens) and height of device.
Added 2 years, 6 months ago.
2 Answers
Hello, thanks for reaching us.
Indeed, this was an automated part description that did not suit the real characteristics of the part. We have changed this to remove the filter membrane description, it should be correct by now.
Please let me know if you have more feedback about this. We'd be happy to help!
Answered 2 years, 6 months ago.
Thank you!
Oh, can you check the 3D model of the width of the pads on the non-filter membrane. I measured it and converted it to mm and it comes at close to 0.4mm. The datasheet is calling for 0.3 +/-0.05mm.
Was wondering if this could be fixed or not?
Thanks again!
Best,
-Randy
Answered 2 years, 6 months ago.